Exhausting system, AIRTEC MODUL X9
| Dust suction hood | 630 | mm |
| Required air-pressure | 5 | bar |
| max. temperature | 60 | Grad |
| Air consumption | 18.000 | m³/h |
| Dust suction hood | 630 | mm |
| Required air-pressure | 5 | bar |
| max. temperature | 60 | Grad |
| Air consumption | 18.000 | m³/h |
| bending speed | 2.1 | m/min |
| Bending capacity - square | 30x30 | mm |
| bending capacity - flat iron | 80x15 | mm |
| Bending capacity - flat iron on edge | 50x10 | mm |
| tube diameter | 1" oder 60x2 | mm |
| sheet width | 1050 | mm |
| plate thickness | 1 | mm |
| roll diameter | 56 | mm |
| dimensions of the machine ca. | 1600 x 700 x 1050 | mm |
| sheet width | 1050 | mm |
| plate thickness | 1,8 | mm |
| pre-bending | 1,5 | |
| upper roll diameter | 70 | mm |
| min. dia. | 105 | mm |
| sheet width | 1050 | mm |
| plate thickness | 3,3 | mm |
| pre-bending | 3,0 | mm |
| roll diameter | 90 | mm |
| min. dia. | 130 | mm |
| sheet width | 2100 | mm |
| plate thickness | 5 | mm |
| pre-bending | 5 | mm |
| upper roll diameter | 170 | mm |
| min. bending diameter | Ø 255 | mm |
| sheet width | 3100 | mm |
| plate thickness | 6 | mm |
| pre-bending | 5 | mm |
| upper roll diameter | 200 | mm |
| min. bending diameter | Ø 300 | mm |
| sheet width | 2100 | mm |
| plate thickness | 13 | mm |
| pre-bending | 10 | mm |
| upper roll diameter | 230 | mm |
| lower roll diameter | 210 | mm |
| sheet width | 2100 | mm |
| plate thickness | 6 | mm |
| pre-bending | 4 | mm |
| upper roll diameter | 160 | mm |
| lower roll diameter | 140 | mm |
