Exhausting system, AIRTEC MODUL X9
| Dust suction hood | 630 | mm |
| Required air-pressure | 5 | bar |
| max. temperature | 60 | Grad |
| Air consumption | 18.000 | m³/h |
| Dust suction hood | 630 | mm |
| Required air-pressure | 5 | bar |
| max. temperature | 60 | Grad |
| Air consumption | 18.000 | m³/h |
| sheet width | 1050 | mm |
| plate thickness | 1 | mm |
| roll diameter | 56 | mm |
| dimensions of the machine ca. | 1600 x 700 x 1050 | mm |
| sheet width | 1050 | mm |
| plate thickness | 1,8 | mm |
| pre-bending | 1,5 | |
| upper roll diameter | 70 | mm |
| min. dia. | 105 | mm |
| sheet width | 1050 | mm |
| plate thickness | 3,3 | mm |
| pre-bending | 3,0 | mm |
| roll diameter | 90 | mm |
| min. dia. | 130 | mm |
| sheet width | 1250 | mm |
| plate thickness | 5,5 | mm |
| pre-bending | 5,0 | mm |
| roll length | 1280 | mm |
| min. dia. | 210 | mm |
| sheet width | 1550 | mm |
| plate thickness | 4,5 | mm |
| pre-bending | 4,0 | mm |
| roll length | 1550 | mm |
| min. dia. | 190 | mm |
| sheet width | 2050 | mm |
| plate thickness | 4,5 | mm |
| pre-bending | 4,0 | mm |
| min. dia. | 210 | mm |
| roll diameter | 140 | mm |
| sheet width | 2100 | mm |
| plate thickness | 5 | mm |
| pre-bending | 5 | mm |
| upper roll diameter | 170 | mm |
| min. bending diameter | Ø 255 | mm |
| sheet width | 3100 | mm |
| plate thickness | 6 | mm |
| pre-bending | 5 | mm |
| upper roll diameter | 200 | mm |
| min. bending diameter | Ø 300 | mm |
